Looking at the console for the logs we saw that there was an error saying 'fsmpm not started' (which was slightly cryptic).Īnyways long story short, we needed to add an additional IP address to our NICs for the metadata network (10.0.10.x) and then everything played nicely. However, when the system tried to mount the volume it came up with a very non descriptive error. When attempting to create the volume we were then able to allocate the LUNs to the tags (note: don't name your meta data LUN 'metadata' - the system doesn't seem to like that) and go ahead and create the volume. We blew the RAID configurations away and re-allocated the RAIDs as detailed above. Here's what I did to resolve the issue - it was, more or less, a requirement for patients. HD Video configuration (Metadata/Journal, Video, Audio and Other tags). In regards to the LUN tagging for the storage pools we have the following planned: QMatic nodes and regular workstations will access the data over AFP shares, though if the QMatic machines are experiencing bottlenecks with disk access we can upgrade them to be attached via the Fabric. The Edit Suites will be direcly attached to the SAN via Fiber on the same fabric as the servers. There is also a Gigabit switch for connecting the servers and the RAID controllers for management.Įssentially we will have the two remaining XServes running as QMaster nodes interfacing with Finalcut server.We have a fiber switch interconnecting the 2x Metadata Controllers, the 4x RAID controllers, plus, when we've installed the system, 2x Mac Pro edit suites for Edit-in place.We have two Apple XServe RAID units with a total capacity (approx.) of 2.75Tb for each controller.We have 4x Apple XServe servers, two with Fiber cards which will the the XSan Metadata controllers (1x master, 1x backup).Unfortunately I can't seem to find the information I need in the XSan or XServe RAID documentation, and the same goes for web searches and looking through the training books from Peach Pit. JBOD configuration (this I would expect to work, however.I am able to get into the RAID Administrator and configure arrays etc, however regardless of the configuration I set I am unable to have the LUNs presented to XSan in order to tag them for a storage pool. I am working on a Final Cut Server setup with an associate and one of the things we need to do is setup XSan2 with two Apple XServe RAID units.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |